BACKUP SENSOR HIGHLIGHTS:
- Two front sensors have 24-foot cables to reach the rear of the vehicle where the controller is installed.
- Front sensors have only a 3-foot detection zone so system does not activate in traffic.
- Backup sensor system includes 5-degree angle wedges for installation in an angled bumper.
- Display only activates and does not emit sound for front sensors.
- VFT LCD display will inform driver how far object is in feet as well as which side of vehicle object obstructs.
- LCD has built-in speaker with low/high volume setting.
- 8-foot rear sensor cable allows for more flexible install of the control box.
- 10-foot cable for the VFT LCD display.
Capabilities
This car safety system alerts you if there are obstacles in front of or behind your vehicle. It comes with six sensors, two of which are installed on the front of the vehicle. The rear parking sensors will deliver an audible alarm inside the vehicle, but the front sensors will display your distance in feet only on the LCD display.
The premium VFT 2-color LCD, which measures 3.3" by 1.5", shows in feet how close you are to obstacles. It indicates whether the obstacle is in front of or behind the vehicle, and has the alarm speaker with volume control on it.
Power to the rear parking sensors comes from your reversing lights, so the back sensors are activated only when your vehicle is reversing. Front sensors are activated whenever your vehicle is running.
How It Works
When your car, truck, or van is in reverse, the rear sensors are sending out ultrasonic pulses at the rate of 4 times a second and receiving any waves that bounce back. If they detect an obstacle, they send a message to the controller, which transmits a signal to the LCD display and speaker.
The front parking sensors are always on, unless your vehicle is in reverse gear. These are the same kind of sensors as on the rear bumper, and they can help with parking in tight spaces in garages or with parallel parking.
REAR SYSTEM DESCRIPTION: Your speakers will beep when an obstacle is within 4 to 6 feet of the rear of your vehicle. As you come closer to the obstacle, you will hear more frequent beeps. If you reach a distance within 1 foot of the obstacle, a continuous beep will sound.
FRONT SYSTEM DESCRIPTION: You will see on your LCD screen how far you are from any object that is 3 feet or less from the front of your car, unless your car happens to be going in reverse.
SPECIFICATIONS:
1. Operating voltage: DC 12 V
2. Power consumption: 3.5 W
3. Operating temperature: -20 degrees C to +60 degrees C
4. Detection distance: 1 to 8 feet
INCLUDED IN PACKAGE
- Six, 21-mm sensors (8-foot rear sensor cable, 24-foot front sensor cable)
- VFT LCD display with integrated speaker (10-foot cable)
- Controller
- Drill bit
- Owners manual/installation instructions
Possible Applications:
Car Safety
Auto Safety
Vehicle Safety
Truck Safety
Van Safety
Motor Vehicle Safety
Driving Safety
Parking Sensor
Safe Backing